Fime Group Rex Zero 1t Tactical 9mm Review
United states of americaA. –-(Ammoland.com)- A few years ago, I received an email well-nigh a new line of pistols coming from Slovenia known as the King pistols past Arex. As I looked over the pictures in my inbox, I idea they looked a lot like clones of the SIG P226. I noticed the toll was several hundred dollars cheaper and that normally signifies that there has been a compromise made somewhere, either in the form of cheap parts or cheap labor.
I made a mental notation to request one for review and was prepared to be unimpressed.
This is non to say that clones are a bad matter. Over the years we have come to prefer some of them over the originals like the FEG Hi-Power clones or the Tanfoglio CZ pattern handguns. Then again those are direct copies whereas the Rex pistols could be more accurately described every bit "inspired by" rather than an actual clone.
These pistols are distributed by the FIME Group and they reached out to united states asking if we would similar to test their latest model: the Rex Nil 1T.
We received a two-tone version in black and flat dark earth with a 5″ threaded barrel. While nosotros were expecting a clone of the venerable SIG P226, the finish effect was much more than.
The Skilful
Prior to the Male monarch pistol, nosotros could not think any other firearm made in Slovenia, some may have been mildly concerned, yet soon we realized these concerns were groundless.
The Male monarch Cypher 1T has an impeccable fit and finish. We had to struggle to detect whatsoever machining marks and saw virtually no flaws, sharp edges or anything of that nature after nosotros disassembled it.
This is a very well-congenital pistol. According to Arex, the pistol is designed to exceed a 30,000-round service life and is rated for +P ammunition.
Materials are key here, and the slide is milled from solid bar stock steel that has been nitro-carburized. The frame is CNC machined from solid T7075 aluminum bar stock and uses a steel locking block insert.
Have-down and reassembly is identical to the SIG classic line of pistols. There are front and rear cocking serrations which let like shooting fish in a barrel racking of the pistol, full length frame rails and a full length railed dust cover compatible with M1913 Picatinny. You can add together your favorite light, laser or combination of the 2 with no problem.
The butt is common cold hammer forged from bar stock, threaded 1/2 x 28″ and comes with a thread protector.
This is the more than mutual pattern for well-nigh sound suppressors, although we were surprised that a European company did not go with the metric left-mitt threads with which nosotros accept become used to on our Glocks, SIGs, HKs and Steyrs.
Speaking of sound suppressors, the sights are tall "suppressor type sights" to allow the shooter to meet over the silencer or co-witness with an RMR type sight.
The Rex Zero 1T is ready for a red dot sight out of the box and comes with four interchangeable mounting plates in what is known as their ROR (Rex Optics Ready) system.
Plate 1 is intended for use with the Trijicon RMR, plate 2 goes with the C-More sights, plate iii is for both Shield and J-Signal sights, and the fourth plate can fit Eotech, Vortex, Burris, Docter Optik, Insight and Meopta.
The condom and magazine release are ambidextrous, and the pistol can be carried either cocked and locked or de-artsy.
Perhaps the biggest departure from the SIG method of operation is that the slide release and de-cocker are the aforementioned unit of measurement, which would be the de-cocking lever on a SIG. Where the SIG slide release is institute is where Arex located the manual prophylactic.
This gives the shooter options: y'all tin can de-cock the pistol and shoot it as a DA/SA or appoint the safety and deport cocked and locked like a 1911.
The Bad
If yous are a die-hard SIG junkie, the slightly different transmission of arms may frustrate you. We got used to it rather chop-chop, but if you want to stay with it and are transitioning from the traditional designs, make certain you practice with it before running it in a match, as a duty/self-defence force slice or even taking a grade.
Our only other issue seemed to exist the magazine release jump. Sometimes information technology did not desire to allow go of an empty magazine.
Despite the similarities, most parts, including the magazines, are not compatible between the Rex Zero 1T and the SIG Sauer P226. The recoil springs were the merely things to us that looked similar. The expert news is that spare magazines are reasonably priced.
The Reality
We plant ourselves shooting slightly to the left of point of aim at 15 yards. With groups ranging from 1.25" to 2.55" In single action mode we measured the trigger weight to exist at 5 to 5.5 pounds and double activity way was closer to 11 pounds.
The King Goose egg 1T digested every round we fed information technology without a unmarried hiccup. That included 115 grain Winchester White Box and Wilson Combat 147 grain JHP and every miscellaneous round in between.
FIME Group claims the King Cipher 1T to be "the almost sought-after pistol in the globe". That may sound similar marketing hype to most people, but in this case, I believe it.
I was prepared to be underwhelmed with the Rex Zero 1T, but on the contrary, I was completely impressed on every level. Fifty-fifty though I have at least 10 SIG pistols in my safe, I will be adding a Rex Cypher 1T to my stable somewhere down the line.
The all-time role of these pistols is their relatively low MSRP, the King Zero 1T retails for $869.
Specifications:
| Caliber: | 9mm Luger (9x19mm) |
| Operating Principle: | Short recoil |
| Activeness Type: | Modified Browning linkless locking system |
| Trigger System: | Single- and Double-action, Hammer fired |
| Length: | eight.one" |
| Barrel Length: | 4.9" |
| Height: | 5.9" |
| Width (slide): | 0.98" |
| Width (frame): | 1.1" |
| Width (safety levers): | 1.46" |
| Weight (without magazine) | 30 oz |
| Magazine Capacity | 20+1 |
| Trigger Pull SA | 5.5 lb. |
| Trigger Pull DA | 11 lb. |
| Trigger Travel DA | 0.five" |
| Reset Travel SA | 0.sixteen" |
| Barrel Profile/Twist | 6 grooves, right-hand twist |
| Butt Twist Charge per unit | 9.viii in / 250 mm |
URL: https://fimegroup.com/shop/Rex-Cipher-1T_Tactical-pistol.html
About Mike Searson:
Mike Searson'due south career as a shooter began as a Marine Rifleman at age 17. He has worked in the firearms manufacture his entire adult life as a Gunsmith, Ballistician, Consultant, Salesman, Author and was kickoff certified to teach firearms safety in 1989.
Mike has written over 2000 articles for a number of magazines, websites and newsletters including Blade, RECOIL, OFF-Grid, Tactical Officer, SWAT, Tactical World, Gun Digest, Examiner.com and the US Concealed Acquit Clan as well equally AmmoLand Shooting Sports News.
Source: https://www.ammoland.com/2018/07/rex-zero-1t-tactical-suppressor-optic-ready-9mm-pistol-review/